How much does a pool cost in Logan?

A typical new pool in Logan costs about $45,000 to $75,000 for a mid-sized fibreglass pool and $50,000 to $80,000 for a basic concrete pool, with fully landscaped or custom designs climbing to $100,000 or more. These are indicative estimates drawn from 2026 Queensland pool construction pricing, not Logan specific quotes. Your final number depends on size, access, soil, fencing and what is included in the builder’s price.

What is the average pool price in Logan in 2026?

Logan sits between Brisbane and the Gold Coast, and builders in all three markets quote from the same Queensland price ranges. The table below uses published 2026 guides and is an indicative estimate only.

Source: The Quote Yard Queensland guide, 2026. Another 2026 guide from Tranquility Pools lists a 7 x 3 metre pool at $65,000 to $90,000 with engineering, approvals, lighting and coping included. The gap shows why inclusions matter as much as the headline price.

For comparison, see our local guides on the cost of a pool in Brisbane and on the Gold Coast.

How does fibreglass compare with concrete on price in Logan?

Fibreglass is usually cheaper and faster to install, while concrete costs more but can be shaped to any size. A shell is made off site and craned in, which is why the Summertime Pools 2026 fibreglass guide and others quote shorter build times.

Concrete (sprayed concrete or gunite) is built on site, so it takes longer and has more variable costs. It suits irregular blocks and larger or custom designs. Our full comparison is in fibreglass vs concrete pools in Queensland, and you can see builders by type under fibreglass pools and concrete pools.

Fibreglass needs crane access. Narrow side access, overhead power lines or a steep street can add crane time or force a concrete build instead. Ask every builder to confirm access in writing.

Why can Logan soil change the cost of a pool?

Much of Queensland sits on reactive clay that swells when wet and shrinks when dry. The QBCC guide to preventing structural damage says the majority of Queensland homes are on reactive clay, and that footings must be designed for these seasonal movements. Sandy or rocky sites behave differently.

In practice, newer Logan estates built on clay fill may need a soil test, an engineer’s footing design and deeper piers. Rock found during excavation is the other common surprise. The QBCC says your contract should include provisions for unforeseen events such as finding rock during excavation or wet weather, so ask how rock and extra excavation will be priced before you sign.

A soil test is a small cost compared with a cracked shell or lifting coping, so treat it as part of the budget rather than an upsell.

What council approvals and fencing will you pay for in Logan?

All new pools and spas in Logan need a building works permit and a final inspection certificate, plus a compulsory compliant fence or barrier, according to Logan City Council. Portable and inflatable pools need the same if they hold more than 300 millimetres of water, more than 2,000 litres, or have a filtration system.

Fencing is one cost that often sits outside the shell price. The Quote Yard 2026 guide estimates safety barriers at $200 to $600 per linear metre, with most pools needing 25 to 40 metres of fencing (indicative estimate). That could be $5,000 to $24,000, so check whether fencing is in or out of each quote.

The QBCC also says you must have a compliant fence before you fill the pool with 300mm or more of water. Logan Council’s 2025 pool safety reminder stresses a minimum 1.2 metre fence in good condition, no climbable objects and a current CPR sign. For the full rules, read our guides on Queensland pool fencing and safety certificates and the pre-summer pool safety checklist.

What else is commonly missing from a pool quote?

The cheapest quote is often the one that leaves things out. Check these items line by line:

• Engineering, soil test and council approval fees
• Pool fencing and the safety certificate inspection
• Excavation and soil removal, including rock allowances
• Paving or coping, landscaping, lighting and heating
• Pool equipment: pump, filter, chlorinator, cleaner and cover
• Electrical work and gas or heat pump connections
• Warranty terms on the shell, surface and equipment

Running costs matter too. Ask the builder for an energy efficient pump and a cover, and plan for chemicals, power and maintenance each year.

How do QBCC payment rules protect you?

Queensland limits what a builder can ask for up front. The QBCC pool page states the deposit must not be more than 10% for work up to $20,000 and 5% for projects of $20,000 or more. Pool contracts should also list drawings, dimensions, depth, interior finish, filtration, the amount and timing of progress payments and warranties.

On payments, the QBCC deposits and progress payments guidance says for contracts over $3,300 the timing is negotiated, but progress payments must be relative to the amount of work completed. Never pay ahead of the work. Also confirm the builder’s licence first: here is how to check a pool builder’s QBCC licence.

What might three typical Logan budgets look like?

Prices vary by site, so treat these as planning scenarios built from the indicative ranges above, not quotes. Their purpose is to show how the extras stack up on top of the base pool.

A compact fibreglass family pool

A 6 x 3 metre fibreglass pool sits at the lower end of the range, around $35,000 to $60,000 before extras. Add fencing of 25 to 40 metres, basic paving and a heat pump, and the total can move well beyond the headline number. This option suits flat blocks in established suburbs with a clear crane path.

A mid-sized pool with decking

An 8 x 4 metre pool in either material is the most common request. After the base price, allow for fencing, a deck or paved surround, lighting and a cover. Builders who include these in one fixed price make comparison easier, so ask for a single all-in figure and a list of what is excluded.

A custom concrete pool on a sloping or clay block

Larger, custom or sloping-site pools sit in the $100,000 and above range, because of retaining walls, engineering, deeper footings and longer build times. If your block falls away from the house or sits on fill in a newer estate, get the engineering scoped early so the builder is not pricing blind.

Which running and ownership costs should you plan for?

The build price is only the start. A pool also needs power for the pump and any heating, chemicals, water top-ups, equipment replacement and regular servicing. The Finder guide to swimming pool running costs is a useful starting point for estimating electricity use.

Ask your builder which pump and filtration set-up they are quoting. A variable speed pump costs more to buy but can use much less power than a single speed pump over a season. A solar blanket or cover reduces evaporation and heat loss, which keeps both water and energy use down.

Insurance is the other item people forget. Tell your home insurer when the pool is built, because policies often need updating, and keep your pool safety certificate and fence in good order so you do not run into compliance problems when selling or leasing.

When is the best time to book a pool build in Logan?

Most buyers start asking in spring, which is exactly when builders book out for summer. Starting the process earlier gives you time to gather quotes, approve plans and avoid rushing a decision. Allow for the approval stage as well as the build: see our guide on how long it takes to build a pool for realistic timeframes.

Wet weather can delay excavation and concrete work, and a clay site is slower to work when saturated. Build a buffer into your plans, and make sure the contract explains what happens if weather or rock causes delays or extra costs.

What questions should you ask before you sign?

• Is the builder QBCC licensed for swimming pool construction, and does the licence number check out?
• Is the price fixed, and what triggers a variation?
• Who arranges the building works permit and the final inspection?
• Is the fence included, and will it pass the pool safety inspection?
• What happens if rock, groundwater or poor soil is found?
• What warranties cover the shell, surface and equipment, and who honours them?
• What is the payment schedule, and does each payment match completed work?

Clear written answers to these questions will do more to protect your budget than a lower price on page one of a quote.

How can you keep a Logan pool build on budget?

Settle the design before you collect quotes. Changing pool size, depth or finish halfway through is the fastest way to blow a budget, because every change becomes a variation. Decide your must-haves, such as a shallow swim-out ledge, a spa or a particular tile, and list the nice-to-haves separately so you can price them as options.

Keep a contingency of at least 10% of the contract price for surprises such as rock, extra excavation or upgrades you decide on during the build. It is easier to hand back unspent contingency than to find money mid-project.

Finally, give every builder the same brief. When quotes differ by tens of thousands of dollars, the difference is nearly always in the inclusions, not in the workmanship.

How many pool builders work in Logan, and how do you compare them?

Our Logan hub lists 66 builders servicing the area, 50 of them licence-checked at the time of writing. That is plenty of choice, so use it.

1. Ask three QBCC-licensed builders to quote the same pool size, depth and finish.
2. Request a written list of inclusions and exclusions.
3. Compare fencing, soil and rock allowances separately.
4. Ask for a build timeline, and see how long it takes to build a pool in Queensland.
5. Check reviews and past Logan projects.

Smaller budgets may suit a plunge pool, which usually costs far less than a full size pool.

Ready to compare? Compare up to 3 QBCC-checked builders through our quote form, or browse the Logan pool builders hub first.